Storefront API setup

  1. First you will need to download the LinkPoint PEM certificate.
    You can download the PEM file from LinkPoint Central.
  2. After you login, click on Support at the top, then click on Download Center.
  3. Click on Download next to PEM and make sure to save the file to the desktop.
  4. Log into the Store Management Tool


  5. Scroll down and on the left menu click on Payments.
  6. Click the X button next to the credit card type you want to remove.
  7. Change processing method to "Online."
  8. Remove the check mark to "accept e-checks."
  9. Scroll down and click on Save.


  10. Click on "Online Processing" on the top menu.
  11. Change Gateway Provider to "LinkPoint."


  12. Click the Edit button next to config file.
  13. Enter your 6 or 7 digit LinkPoint store number (for Yourpay accounts its 10 digits)
  14. Click the browse button next to config file
  15. Select the PEM file you downloaded earlier and click on Open.
  16. Click the Save button right below the browse button.
  17. Click the Save button on the bottom right